你好!欢迎来到深圳市品慧电子有限公司!
语言
当前位置:首页 >> 技术中心 >> 通用技术 >> NXP SSL2102 30W反激式TRIAC调光LED驱动电源设计指南

NXP SSL2102 30W反激式TRIAC调光LED驱动电源设计指南


导读:SSL2102 IC是为闪烁调光设计的LED驱动电源,SSL2102 IC可以用在降压或反激变换器的拓扑结构中,反激拓扑结构在电器输出隔离上是必须的。当考虑到效率和开关尺寸而选择输出电压额定值时,他可以提供很大的自由度。这份应用指南描述怎样提高基本的双向可控硅调光电路实现高性能的设计。

SSL2102是SSL210x调光驱动系列的一部分,好包括:

1.SSL2101: SO16封装, 集成mosfet和泄放开关
2.SSL2102: SO20封装, 集成mosfet和泄放开关
3.SSL2103: SO14封装,外部MOSFET和泄放开关

1.1 The application requirement

When designing an application that can support a wide output voltage range and a constant current, it is important to dimension all components for the maximum output power. The basic application is optimized for a 30 W output and it can be scaled down relatively easily. The application described here, is a retro-fit application using a lamp within an existing infrastructure. The application targets the lower end of the market(commercial, domestic) and has the following specifications:

• Output power of 30 W
• Power factor of 0.7 or larger
• 150 mA peak-to-peak output current ripple (? 10 %)
• Efficiency of 72 %
• The lamp is compatible with a triac dimmers, without noticeable flicker or jumps on the output
• The input voltage is 230 V, 50 Hz
• The output voltage is 42 V, 700mA

1.2 The design choices

The SSL2102 is rated for a maximum output power of 25 W. A higher output power might cause life time issues due to improper cooling. This must be taken into account when the PCB is designed and an extra heatsink might be required.The output power is important for the selection of the transformer. For outputs above 26 W, an E30 or an EFD30 core must be used. The transformer will take up a large part of the required space.The design is optimized for a 230 V (AC) input.

Almost all component values will change when the design is modified for 120 V (AC).Because the input voltage is halved, the input current must be doubled to have the same output power. The buffer capacitance must be doubled, the turns ratio must be changed,the damper resistor can be halved, etc. The brightness control circuit is also optimized for 230 V (AC), which determines the dimmer duty factor by averaging the rectified input voltage.

设计详情请下载技术资料

用户评论

发评论送积分,参与就有奖励!

发表评论

评论内容:发表评论不能请不要超过250字;发表评论请自觉遵守互联网相关政策法规。

深圳市品慧电子有限公司